Well Pump Replacement Cost Calculator

Replacing a well pump usually costs $1,000 to $2,500 for a submersible pump, $400 to $1,400 for a jet pump and $2,000 to $5,000 for a constant-pressure system, installed. Deep wells cost more when the drop pipe and wire are replaced too, which adds about $3.40 to $8.74 per foot of depth in materials. The calculator below adds it up for your well.

Pump type

Well depth to the pump, feet

Replace the drop pipe and wire too

NoYes

Replace the pressure tank at the same time

NoYes

After-hours or weekend call-out

NoYes

Pump age, years

Repair quote you received ($)

Replacement quote you received ($)

$1,750

$1,000 to $2,500 installed

Pump installed: $1,000 to $2,500

At 200 ft or deeper most crews use a pump hoist or truck to pull the pump, which can push labor toward the top of the range.

A pump usually lasts 8 to 15 years. Yours is 12.

Show the math

pump installed = $1,000 to $2,500 (typical $1,750)

total = $1,000 to $2,500, typical $1,750

$1,750Back to calculator

How to use this calculator

Choose your pump type. If you're not sure, a pump inside the well casing is a submersible, and a pump in the basement or a pump house is a jet pump.
Enter how deep the pump sits. Your well log or the last service invoice usually lists it.
Choose whether the pipe and wire should be replaced too. On older or deeper wells many crews replace them while the pump is out.
Add a pressure tank or an after-hours call-out if they apply.
Enter your pump's age and any quotes to see whether repair or replacement makes more sense.

The formula

Total cost = pump installed + drop pipe and wire (if replaced) + pressure tank (if replaced) + after-hours labor (if any)

Pipe and wire are priced per foot of depth from current retail prices: 1-1/4 inch polyethylene drop pipe at $1.48 to $4.74 per foot and 10/3 submersible pump cable at $1.92 to $4.00 per foot.

Example 1: submersible pump at 200 ft, pipe and wire replaced. The pump costs $1,000 to $2,500 installed. Pipe and wire for 200 ft add $680 to $1,748. The total is $1,680 to $4,248, typically about $2,964.

Example 2: constant-pressure system at 300 ft, with new pipe, wire and pressure tank. The pump costs $2,000 to $5,000, pipe and wire for 300 ft $1,020 to $2,622, and a new tank $200 to $1,500. The total is $3,220 to $9,122, typically about $6,171.

What this calculator doesn't cover

Drilling a new well or deepening an old one.
Electrical work beyond the pump circuit, such as a new panel breaker or a long trench to the well.
Water treatment you may want once the system is open, like a sediment filter.
Permits ($50 to $200 where required, per HomeAdvisor) and local service-call minimums.
Solar pumps ($1,500 to $6,500 installed).
Prices outside the US.

Well pump replacement cost by type (US, installed)

Pump type	Usual depth	Installed cost
Shallow-well jet	to about 25 ft	$400 to $1,000
Deep-well jet	about 25 to 150 ft	$500 to $1,400
Submersible	most wells, any depth	$1,000 to $2,500
Constant-pressure submersible	any depth	$2,000 to $5,000
Solar	off-grid	$1,500 to $6,500

HomeGuide (2025), Forbes Home (2025), HomeAdvisor (2026). Most homeowners pay $975 to $2,825; the average is about $1,900 (Angi, ConsumerAffairs, 2026).

Submersible pump prices by horsepower (pump only, Oct 2026)

Horsepower	Example pump	Rated depth	Price
1/2 hp	Everbilt EFSUB5-123HD, 10 gpm	about 125 ft	$449
3/4 hp	Everbilt EFSUB7-122HD, 10 gpm	about 150 ft	$569
1 hp	Everbilt EFSUB10-122HD, 10 gpm	about 250 ft	$639
1-1/2 hp	ECO-FLO EFSUB15-123, 8.1 gpm	about 300 ft	$682

Home Depot listings checked Oct 21, 2026. Brand-name pumps (Goulds, Franklin) cost more. Prices change; check before you buy.

How much water does a home need?

Home	Pump flow
Minimum for any home	6 gpm
3 bedrooms, 2 baths	12 gpm
4 bedrooms, 3 baths	16 gpm

Penn State Extension, Water System Planning (2025).

Common repairs (parts and labor)

Repair	Typical cost
Pressure switch	$120 to $200
Start capacitor	$100 to $300
Control box	$200 to $600
Foot valve (jet pumps)	$150 to $400

HomeGuide (2025) and HomeAdvisor (2026).

Tips

Ask whether the quote includes new drop pipe, wire, a check valve and a new pressure switch. Those parts are cheap while the pump is out and expensive to pull for later.
If the pump is short-cycling, check the pressure tank first. A waterlogged tank can kill a new pump fast. Use our pressure tank calculator to check the size and pre-charge.
Match the pump to your flow need and depth, not just the old pump's label. Upsizing horsepower without checking the well's yield can pull the water level down to the pump.
Constant-pressure systems cost more but give steady pressure and soft starts, which can help a pump last.
Get the depth and pump model from your well log before you call. Quotes are faster and more accurate.

FAQ

How much does it cost to replace a well pump?

Most homeowners pay about $975 to $2,825, around $1,900 on average. A submersible pump runs $1,000 to $2,500 installed, a jet pump $400 to $1,400 and a constant-pressure system $2,000 to $5,000.

How long does a well pump last?

Usually 8 to 15 years. Pumps in wells with a lot of sand or sediment wear out sooner, and frequent short-cycling shortens their life.

Should I repair or replace my well pump?

A common rule is to replace a pump older than 10 to 15 years or one that keeps needing repairs, and to repair a single failed part when the fix costs less than half of a replacement.

How much does labor cost to replace a well pump?

Labor usually runs $250 to $1,000, and the job takes about 3 to 6 hours. After-hours and weekend calls usually cost about double.

Does well depth change the cost?

Yes, mostly through the pipe and wire. At current retail prices they add about $3.40 to $8.74 per foot when replaced, and deep pumps need more horsepower and often a pump hoist.

What size well pump do I need?

Size for your home's flow need and the depth to the water. Penn State Extension suggests at least 6 gpm for any home, about 12 gpm for 3 bedrooms and 2 baths, and 16 gpm for 4 bedrooms and 3 baths.